Bookmark and Share
MW Hire are one of Ireland's leading plant and pump hire suppliers.

 

<<NEW PRODUCT - The BIG BAG Flood Defense System>>

Electric Pumps

The MW Hire Group has a full range of Electric Pumps ranging in size from 2" to 12" catering for all applications.

Our Openset pump range consists of:

PUDDLE PUMPS

LSR Series

LB Series
   

 

1" Puddle Pump (LSR Series)

Ideal for pumping water off flat surfaces where a sump is not availible

LSR Series Data

Urethane, Semi Vortex Impeller and Wear Parts for maximum durability and maintaining pump performance.
Double Inside Mechanical Seal With SiC faces provides the longest operational life.
Oil Lifter provides lubrication of the seal faces. (Patent Pending)
V-Ring Seal protects
mechanical seal from abrasive particles.

OPTIONAL ACCESSORIES
TS-301 Float Switch for automatic operation.
(Use of float switch will not permit low level pumping).

 

2" Puddle Pump (LB Series)

Simple & Lightweight pump used for discharguing water in tight areas - sites/farms etc.

LB Series Data

High chrome semi-open impeller resists wear for adhesive particles.

Diode motor protectors prevent stator damage in high amperage or run-dry situations.

Up to 70' shut off head

Slimline design allows pumps to fit into 8" pipes.

Up to 60' shut off head.

Available in 110V and 220V single-phase with 50 foot cables.

Double Inside Mechanical Seal With SiC faces provides the longest operational life.

Oil Lifter provides lubrication of the
seal faces. (Patent Pending).

SUBMERSIBLE PUMPS

LH/LHW Series

 

3" - 4" Submersible pump (LH/LHR Series)

Rental and Supply Companies preferred choice for contractor slimline pumps

LH/LHR Series Data

Discharge sizes from 2-4 inches and horsepower range from 4-40 hp

Replaceable and adjustable high chrome wear rings provide increased wear resistance.

Built in thermal and amperage protectors prevent motor failure in run-dry or surge conditions.

High pressure dual silicon carbide mechanical seals operate in a separate oil chamber and are capable of withstanding operating depths of 328 feet.

Seal pressure relief ports provide a flow path above the pump casing and allow water release from the pump and away from the shaft. This protects the mechanical seals from excessive pumping pressure or water hammer in high head pumping applications.

Anti-wicking cable entrance and Tsurumi's exclusive oil lifter for added protection.

SUBMERSIBLE PUMPS

GSZ Series

 

6" - 10" Submersible Pumps

Outstanding Slurry/Dewatering pumps used in Mining applications.

Discharge sizes vary from 6" to 10" and HP Rating from 30-100HP. Cast iron construction.

GSZ Series Data

4 pole, 1800 rpm motors or 6 pole, 1200 rpm motors.

Seal Pressure relief ports on 4 pole, 1800 rpm models.

Lower impeller tip speeds extend parts wear life 2-3 times.

Rugged cast iron construction.

Dual silicon carbide mechanical seals.

Internal Thermal motor protection and Tsurumi's exclusive oil lifter.

Anti wicking cable entrance.